STANDARD HMC 20000(20 TON)

Front Outriggers For Stability

Heavy Duty Bumper

Advanced Technology Telescoping Boom

Heavy Weight Counter

SPECIFICATIONS: HMC-20000(20 TON)

LIFTING CAPACITY20 TON
ENGINESE-460, 4-CYLINDER, DIRECT INJECTION, WATER COOLED ENGINE
AIR CLEANERDRY TYPE
RATED POWER60 HP @ 2200 RPM
TRANSMISSIONSLIDING MESH, SPUR TEETH WITH 10 FORWARD, 2 REVERSE SPEEDS AND HI-LOW RANGE SELECTOR
CLUTCHSINGLE PLATE, HEAVY DUTY & DRY FRICTION WITH DIAPHAGRAM TYPE PRESSURE PLATE
BRAKEPNEUTICALLY ASSISTED HYDRAULIC BRAKES FRONT & REAR BRAKES ARE ACTUATED THROUGH A SINGLE PEDAL OR AIR BRAKES (OPTIONAL)
MAX SPEED28 KMPH
HYDRAULIC SYSTEMINTRA VANE TYPE MAIN PUMP
FOUR SPOOL CONTROL VALVE
TWO DOUBLE ACTING LIFT CYLINDERS
TWO DOUBLE ACTING STEERING CYLINDERS
3 DOUBLE ACTING BOOM EXTENSION CYLINDERS
STEERINGHYDRAULICALLY OPERATED WITH 55 Degree ARTICULATION ON EITHER SIDE AND TURNING RADIUS OF 7.25M (APPROX.) ON OUTER REAR WHEELS
ELECTRICAL SYSTEM12V, NEGATIVE EARTH, SINGLE BATTERY
TELESCOPING BOOM5 PART HEAVY DUTY BOOMS WITH 3 HYDRAULIC OPERATED EXTENSIONS (1 EXTENSION WITH WIRE)
DERRICKINGTHROUGH 2 DOUBLE ACTING LIFT JACKS WITH ROD DIA 100MM
MAX . BOOM HEIGHT75′ WITH FOUR EXTENSIONS
MAIN FRAMEEXTRA HEAVY IN SINGLE RADIUS
CHASSISHEAVY WITH EXTRA RE-INFORCEMENTS
TELESCOPING TIME35 SECONDS
BOOM LIFTING RANGE/TIME0Degree To 65Degree / 23 SECONDS
HOISTWINCH ROPE DIA 13MM DRIVEN BY HYDRAULIC MOTOR WITH 4 FALLS (6 FALLS OPTIONAL)
HOIST SPEED24 MTRS./MIN. (LINE SPEED)
TYRES12.00X20-16PR (STD.) (FOUR NOS.)
14.00X25-20PR (STD.) (TWO NOS.)
FLUID CAPACITY(IN LITRES)
ENGINE12.5
FUEL TANK45
HYD. TANK120
TRANSMISSION47
STANDARD EQUIPMENTALL WEATHER CABIN
LIFT CYLINDER GUARD
TURN & REVERSE LAMP
FRONT BUMPER REFLECTOR
REAR VIEW MIRROR
SAFETYAUDIO OVERLOADED INDICATION
HOSE FAILURE PROTECTION
SAFETY VALVE ON LIFT CYLINDER
BOOM PIN FAILURE PROTECTION
TIE BOLT PIN FAILURE PROTECTION
FRONT OUTRIGGERS (OPTIONAL)
UNLADEN WEIGHT13800 KG. (APPROX)
TRACKFRONT- 2130 MM (CENTER OF TWIN WHEELS)
REAR- 1730 MM (CENTER OF WHEELS)

LOAD CHART